Products

The G-Dive traditional 5-finger drysuit gloves set available in two different sizes with two different cuff lengths.
Easy to pull over your ring system to perform a perfect seal. One size fits most for use with your existing drysuit ring system.

The standard design neck seal found on most drysuits offers a {10in | 252mm} mounting diameter at the base, three different latex thickness options, and a variety of choices for neck sizing - see sizing chart below. As a general rule, the seal opening should be trimmed to be no smaller than 80% (i.e. maximum of 20% less) than your actual measurement of the relaxed neck circumference, tighter than that could cut off blood flow to your brain.

• Flexible (FD): 0.5mm to 0.7mm - More flexible with more stretch than the standard
• Standard (GD): 0.7mm to 1.0mm - Usual thickness found on most seals
• HeavyDuty (HD): 1.0mm to 1.4mm - Thicker, thus more durable, but less comfortable

The Bottleneck wrist seal is the generic design found on most drysuits. There are two different latex thickness options, and a variety of options for mounting and wrist sizing - see link to sizing chart above. Sold as a pair (two).

• Standard (GD): 0.7mm to 1.0mm
• HeavyDuty / Thick (HD): 1.0mm to 1.3mm 

There are two different styles of “bottleneck” shaped wrist seals: Bottleneck and Long Bottleneck. This is the generic design found on most drysuits. There are two different latex thickness options and a variety of options for mounting and wrist sizing.

The standard conical Akle Seals feature an 17" / 43cm Mounting circumference (standard) and 1" / 25mm for mounting. They are available in a variety of options for size and quality. Sold as a pair (two).

Circumference at Ankle:
Large 150 mm / 6"
Medium 142 mm / 5,5"

We offer this Conical Inner Neck Seal design with an 20cm (8-inch) mounting diameter that is found on Viking brand and many other brand drysuits. If you are going to glue the seal to the inner part of the suit the inner seal design may work better, although some people still prefer inner mounting a standard bellows design neck seal. Conical inner neck seals are available only in 0.7-1.0mm standard thickness and two sizes; the medium is 25cm (10-inch) in circumference and fits 28-35cm (11-inch to 13-inch) necks, the large is 30cm (12-inch) circumference and fits 33-40cm (13-inch to 16-inch) necks.

Sizing video:
https://youtu.be/2rGTvinn19E

The standard conical Wrist Seals feature an 11" / 28cm Mounting circumference (standard) and 1" / 25mm for mounting. The Conical is a tapered cone shape is ideal if you have thin wrists or a standard seal leaks when you grab and hold something (causing the tendons to become very prominent at your wrist). They are available in a variety of options for mounting opening and wrist sizing - see link to sizing chart above. Sold as a pair (two).

There are three different styles of “cone” shaped wrist seals: Conical, Long Conical, and Semi-Conical. The Conical has a tapered cone shape. The Long Conical has more material and is similar to the seals found on Viking brand drysuits. The cone shaped design is ideal if you have thin wrists or a standard seal leaks when you grab and hold something (causing the tendons to become very prominent at your wrist.) They are available in a variety of options for mounting and wrist sizing.

Link to sizing:
https://youtu.be/egV5JPl169Q

Use G-Dive Finishing Tape to reinforce and improve the appearance of seams and edges of drysuit repairs.

Flanged hoods can be mounted directly to the dry-suit or used with the SI-tech ring system. Has a latex thickness : 1.1mm to 1.4mm.

G-Dive add their specially formulated compound to obtain a combination of high flexibility and a long lifespan. The coating G-Dive adds to the Latex Seals protects the proteins inside the latex from UV and ozone which normally wears the latex down.

G-Dive's main production method is warm dipping of Latex products, which is a very unique production method and gives the products a clear advantage compared with traditional latex production. With this method they can manage and control the thickness very precisely and get consistent products.

Easy to pull over your ring system to perform a perfect seal. One size fits most for use with your existing drysuit ring system.

One Size

The Long Bottleneck design gives users more material to customize mounting. There are two different latex thickness options and these are only available in size LARGE. Sold as a pair (two).

• Standard (GD): 0.7mm to 1.0mm

The specialty latex compound is highly flexible and has a long lifespan. An added coating protects the proteins inside the latex from UV and ozone which normally break down the latex. The wrist seals are manufactured through a process called “warm dipping,” which is a production method unique to G-Dives and gives their products a clear advantage compared with traditional latex production. There are two different styles of “bottleneck” shaped wrist seals: Bottleneck and Long Bottleneck. This is the generic design found on most drysuits. There are two different latex thickness options and a variety of options for mounting.

Long conical Wrist Seals feature an 14" 35cm Mounting circumference and the mounting is flexible due to the shape. The Long Conical is an extended, tapered cone shape. Also known as the Viking model, this design offers up to a 14” mounting circumference, which gives users more material to customize mounting. 

Standard is thick at mounting and thinner at the wrist. Heavy duty is thick all the ways. 

Sold as a pair (two).

There are three different styles of “cone” shaped wrist seals: Conical, Long Conical, and Semi-Conical. The Conical has a tapered cone shape. The Long Conical has more material and is similar to the seals found on Viking brand drysuits. The cone shaped design is ideal if you have thin wrists or a standard seal leaks when you grab and hold something (causing the tendons to become very prominent at your wrist.) They are available in a variety of options for mounting and wrist sizing.

Only sold in Denmark - Description in Danish

Våddragt reparation simpelt og nemt med Aquasure Neo Black Witch. Denne sorte kontakt lim er til en permanent hæftning mod neoprene og andre overfladebehandlede materialer.

• Tørrer hurtigt  – Tørrer på ca 20 min
• Holdbar – Kommer i en 28 ml tube, Hæfter på neopren, latex og gummi
• Fleksibel – Hærder op til en elastisk gummi som kan arbejde med de materialer den hæfter på
• Vandtæt – Giver en fuldstændig vandtæt limning

Semi Conical Wrist Seals feature an 11" Mounting circumference (standard) and 1" for mounting. The Semi Conical is a narrow-tapered cone shape and is a good design for divers with slender forearms and wrists. They are available in a variety of choices for mounting opening and wrist sizing - see link to sizing chart Sold as a pair (two).

An added coating protects the proteins inside the latex from UV and ozone which normally break down the latex. The wrist seals are manufactured through a process called “warm dipping,” which is a production method unique to G-Dives and gives their products a clear advantage compared with traditional latex production. There are two different styles of “bottleneck” shaped wrist seals: Bottleneck and Long Bottleneck. This is the generic design found on most drysuits. There are two different latex thickness options and a variety of options for mounting and wrist sizing.

There are three different styles of “cone” shaped wrist seals: Conical, Long Conical, and Semi-Conical. The Conical has a tapered cone shape. The Long Conical has more material and is similar to the seals found on Viking brand drysuits. The cone shaped design is ideal if you have thin wrists or a standard seal leaks when you grab and hold something (causing the tendons to become very prominent at your wrist.) They are available in a variety of options for mounting and wrist sizing.

Link to sizing:
https://youtu.be/egV5JPl169Q